intensity IF COMBO DI4738, Инструкция по эксплуатации

Страница: 18 / 36

TENSPros
2) The wires provided with the system insert
into the jack sockets located on top of the
device.
3) Holding the insulated portion of the
connector, push the plug end of the wire
into one of the jacks (see drawing); one or
two sets of wires may be used.
4) This device has two output receptacles controlled by Channel 1
and Channel 2 at the top of the unit. You may choose to use one
channel with one pair of lead wires or both channels with two
pairs of lead wires. Using both channels gives the user the
advantage of stimulating two different areas at the same time.
Caution:
Do not insert the plug of the patient lead wire into any AC power
supply socket.
4.4 Electrode
4.4.1 Electrode options
The electrodes are disposable and should be routinely replaced
when they start to lose their adhesive nature. If you are unsure of
your electrode adhesive properties, order replacement electrodes.
Replacement electrodes should be re-ordered through or on the
advice of your physician to ensure proper quality. Follow application
procedures outlined in electrode packing, to maintain optimal
stimulation and to prevent skin irritation.
4.4.2 Place electrodes on skin
Apply electrodes to the exact site indicated by
your physician or therapist, before applying
electrodes, be sure the skin surface over
which electrodes are placed is thoroughly
cleaned and dried. Make sure the electrodes
are placed firmly to the skin and make good contact between the
skin and the electrodes. Place the electrodes over the skin; attach
them properly, firmly, and evenly.
18