Intense Sniper T, Руководство пользователя

Страница: 10 / 24

1 0 // s n i p e r T m a n u a l
8
7
9
C O n n e C T i n G r e A r T r i A n G L e T O l o w e r l i n k / /
A Put a small dab of grease on
the outside bearing race as well
as on the contacting surface of
the bearing cap (#130765). This
will hold the bearing caps in place
during installation (Image #7).
B Slide rear triangle over the lower
link and line up the pivot point over
the bearing caps (Image #8).
C Insert greased main pivot bolt
(#130791) into non-drive side
of lower link. Insert 8 mm hex
wrench and tighten until snug. We
will return with a torque wrench
after completed frame assembly
(Image #9).