Intense SNIPER T ELITE, Руководство пользователя

Страница: 7 / 27

13 12
S T E P 2
INSTALL
HANDLEBARS
Remove any packaging on the front of the bike, then
spin the handlebar stem 180º so that the stem and
forks are facing forward (A) . Make sure that the forks
are the correct way around – the front brake caliper
should be on the left (non-drive) side of the bike, with
the fork arch facing forward.
Using a 4mm Allen key remove the faceplate of the
stem and put the handlebars in place (B) . Use the
guidelines printed on the handlebars to help position
them centrally and evenly. Check that the brake, gear
and dropper post cables have a nice flow and are not
kinked or twisted in any way.
Replace the faceplate of the stem and reinsert the
bolts, firstly by hand and then with the 4mm Allen key
(C) . Gradually tighten the bolts, making sure that the
bars are still positioned correctly and that the space
between the faceplate and the main body of the stem
is even all the way around.
When tightening the bolts follow this pattern to ensure
even clamping: top left, bottom right, bottom left, top
right. Finish off using the torque wrench to 5Nm-7Nm.
A B
C