Inteno XG6846, Руководство по установке, Страница: 5 / 12

5
English
Svenska
Start Box
Check that the following items
are in the Start Box:
• Inteno XG6846 Broadband Switch
• RJ45 Ethernet cable with
red color-coding
• RJ45 Ethernet cable without
color-coding
• 230V power supply adapter
• Installation guide (this publication)
Make sure that everything that is
mentioned above is included in the
start box before starting the installation.
How to install your
broadband switch
Place the switch close to your broadband
outlet, alternatively, at your computer.
The illustration to the left shows how you
connect it.
Installation
step by step
Step 1. This step applies only if you
already have an existing Internet-/broad-
band service, otherwise skip this step and
go to step 2.
Unplug the existing network cable from
the network outlet (in the wall) and con-
nect it to the LAN (RED) outlet of the
broadband switch.
Then connect the network cable without
color-coding (included in the start box)
between the outlet labeled WAN/EXT1 on
the broadband switch and the network
outlet in the wall. Then go to step 4.
Step 2. Connect the network cable with
RED color-coding, which came with the
start box, to the LAN1 (RED) on the bro-
adband switch and the LAN port on your
computer. If you have a router, connect
the network cable (RED color-coding) to
the router’s input.
Back/side
XG6846
Broadband Switch
This installation guide will help you install the Inteno XG6846
Broadband Switch.
a
b
d
c