Inteno XG6749, Руководство по установке

Страница: 4 / 11

7 6
English
Svenska
Suomi
Norsk
XG6749
Broadband switch
XG6749
Broadband switch
Step 3. Connect the network cable without
color-coding, which came with the start box,
to the port marked WAN on the broadband
switch and the network outlet (in the wall).
Step 4. Plug the power adapter (included in
the start box) in the broadband switch and
an electrical outlet.
Step 5. Depending on the operator the
broadband switch may now need to update
itself with your user profile. Please give it ten
minutes for this procedure, without turning
off the power.
Step 6. Go to the computer and check that
you can browse from it. If you can surf on
the internet the installation is complete. If it
doesn’t work, please go to the FAQ section.
Step 7. If you have a digital TV service via
broadband, you need to connect the net-
work cable of the digital TV set top box to
any of the LAN 1-8 ports on the broadband
switch. Please check for further instructions
in the manual supplied with the STB. Varia-
tions may occur.
Step 8. If you have a telephony service
(VoIP) via broadband, you need to con-
nect the netowork cable of the telephone
adapter to any of the LAN 1-8 ports on the
broadband switch. Please check for further
instructions in the manual supplied with the
STB. Variations may occur.
IMPORTANT. The broadband switch should
always be connected. It automatically
checks the user profile and updates its
software.
Explanation of the ports
on your broadband switch
(From right to left)
WAN This is where you plug in
your network outlet.
LAN 1-8 This is where you connect
your computer, router,
digital TV set top box
and telephone adapter
PWR This is where you connect
the power adapter.
Description of LEDs
WAN-indicator
On (yellow) - Connected to 100Mbps
network
On (Green) - Connected to 1000Mbps
network
Off - Not connected to a network
Flashing - Activity
LAN 1-8 indicators
On (yellow) - Connected to 100Mbps
network
On (Green) - Connected to 1000Mbps
network
Off - LAN not connected
Flashing - Activity
MANAGEMENT(MGM)-indicator
On (Green) - Connection with the MGM
server is ok
Off - No connection with the MGM
server.
Flashing - Activity, update in progress
Power(PWR)-indikator
e
f
On (Green)
- Power is on
On (RED)
- Start up failure (please contact
your service operator)
Off
- Power is off
Frequently Asked
Questions
Get detailed information on how you
connect your digital TV and telephone
services can be found in the manuals for
each service.
I can’t find the network outlet/LAN-
port on my computer.
Typically, the network outlet or the LAN
port is the only port on the computer
where the supplied network cable fits. In
some computers there is a built-in telep-
hone modem, but the contact is smaller
than the network outlet / LAN port.
I can’t browse from my computer
even though I have connected to the
broadband swith to the network outlet
and my computer to the broadband
switch.
1. Check that the broadband switch
has got power (the PWR LED should
be green).
2. Make sure you have connected the
cables to the appropriate ports on the
broadband switch. The WAN LED
should be YELLOW/GREEN and
the outlet where the computer is
connected (any of LAN 1-8) should
be GREEN.
3. Do you use your own cables? Try if it
works when you use the cables that
are included in the start box.
4. Restart the broadband switch by
pulling the power plug from the broad
-band switch for a few seconds and
then reconnect the power plug. The
broadband switch now needs to
update itself with your user profile.
Please give it ten minutes for this
procedure, without turning off the
power.
Wait a few minutes and then restart
the broadband switch. If you still can’t
browse, please contact your operator
support.
g