Inteno FG101, Руководство по установке

Страница: 4 / 11

7 6
English
Svenska
Suomi
Norsk
3. Finally, plug the power adapter into an
electrical outlet and the contact into
the modern where it is labelled
“Power.”
4. Start the computer.
5. The indicator lights will blink for roughly
30 seconds. If you have connected your
modem properly, the Power, WAN and
Internet indicator lights will be a fixed
green color. See picture labelled “Front.”
You have now connected the FG101.
Connecting the
Wireless Local Area
Network (WLAN)
1. Make sure that the WLAN button on the
front panel is in the ON position.
2. For wireless connection first perform
a search for available wireless networks
using the WLAN client.
3. Compare the list with the SSID which
is shown on a sticker on the under side
of the FG101.
4. Connect by double clicking on the
correct SSID and then providing the
encryption code which is shown on the
sticker labelled WPA on the under side
of the FG101.
Connecting your digital
TV Box for IPTV
1. A network cable was provided with your
digital TV Box. Connect it to the
network port (LAN 1-4). NOTE! In some
cases, your broadband service provider
will instruct you to connect to a specific
network port (LAN 1-4). Verify this in the
documents and/or manual you received
from your service provider.
2. Connect the other end of the network
cable to your digital TV Box for IPTV.
3. Start the digital TV Box for IPTV.
4. If a problem should occur during the
connection process, we recommend
that you contact your service provider.
Connecting
IP Telephony (VoIP)
1. Connect the telephone cable to the port
labelled TEL 1 on the FG101.
2. Connect the other end of the telephone
cable to your telephone. Alternatively,
follow the instructions from your service
provider.
3. Activate the telephony service
according to the instructions from your
service provider.
Description of
the front panel
1. WLAN-ON/OFF
On – WLAN activated
Off – WLAN not activated
2. Internet indicator light
On (green) – IP address received
On (red) – IP address not received
3. WAN indicator light
On – Connected to the network
Off – Not connected to the network
Blinking – Active
4. WLAN indicator light
On – WLAN activated
Off – WLAN not activated
Blinking – Active
5. TELE2
On (green) – The telephone receiver is
off (the telephone is in use)
Off – The telephone receiver is on (the
telephone is not in use)
Blinking (green) – Incoming call
e
g
h
f
6. TELE 1
On (green) – The telephone receiver is
off (the telephone is in use)
Off – The telephone receiver is on (the
telephone is not in use)
Blinking (green) – Incoming call
7.
Ethernet indicator light
On – LAN connected
Off – LAN not connected
Blinking – Active
8. Power indicator light
On (green) – Connected
to a power source
On (red) – Start up error (contact your
service provider)
Off – Not connected to a
power source
Advanced network
administration
Check that the computer which is
connected to your modem has been
issued an automatic IP address between
192.168.1.2 and 192.168.1.254. You may
need to manually set the IP address. For
example: 192.168.1.23, subnet mask:
255.255.255.0.
1. In your browser’s address line type
http://192.168.1.1
2. Login in using admin for the user name
and admin for the password
3. Select the function you want from the
modem’s menu on the left. Note that
network administration is only available
in the standard software. If your service
provider has their own software, this
function may be turned off or have
only limited function. Contact your
service provider for more information.
Troubleshooting
1. Check that the power is on. The power
indicator light should be on (Power).
See picture labelled “Front.”
2. Is the power indicator light off? Check
that the modem is properly connected
to the power adapter. Check that
the power adapter is connected to an
electrical outlet. If the modem is
properly connected to an electrical
outlet, a power indicator light that is
still not on may indicate a faulty
modem or a faulty power adapter.
Contact your service provider.
3. Are the Power and Internet indicator
lights red? Contact your service
provider.
4. Is the WAN indicator light off? Check
the connection between the WAN port
on the modem and your broadband
outlet. If the WAN indicator light is off,
despite proper connection, contact
your service provider.
5. Is the Ethernet indicator light off?
Check the connection between the
LAN port on the modem and the
Network Interface Card (NIC) in your
computer. Check that the NIC in your
computer is functioning properly.
6. Reset button. See picture labelled
“Back.” This button resets the modem
to factory settings. Hold it in for
10 seconds.
i
j
FG101
Fiber Residential Gateway
FG101
Fiber Residential Gateway