Intenda CARAVAN BOX, Руководство по установке, использованию и техническому обслуживанию

Страница: 20 / 22

20
- for unproper uses and/or by unskilled people
- for purposes which are contrary to the norms
- in case of severe maintenance deficiencies
- in case of unauthorized modifications of the product
- with total or partial non-compliance with the instructions
It is not possible to use the box in conditions of strong wind and/or snow.
In order to use the product during these adverse conditions, a written declaration by
Intenda is needed.
Every modification of the product which changes the functionalities of the box and
subsequently modify the risks, have not been authorized by the constructor.
These kinds of changes, if not authorized by the constructor, will cause the decay the
warranty and will invalid the declaration of conformity of the product.
b. Residual risks
According to its own knowledge of the product, the constructor declares that the following dangers
may occur:
- Unusual vibrations of the structure
- Cutting, shearing, hitting of the operator by the mobile components during the handling
of the box
- Slipping or trippling of the operator during the installation process
- Breaking of the restraining elements during adverse wind; in this case, there is the risk
for every exposed person to get hit by the structure
- Structural loss of stability, if the prescription previously indicated will not be respected
6. CHECKS AND MAINTENANCE
It is necessary to periodically check the general state of the structure, of the connections between
the various components, of the and the PVC awnings
.
The PVC awning can be washed with mild soap and then rinsed with water only. After the cleaning,
the PVC shall be well dried before fold, in order to avoid the creation of moulds,
The checks and maintenance frequency indicated below is to be considered as the minimum interval
to grant efficiency, security and durability of the product of the product in normal use situations.
A constant supervision is recommended, in order to act promptly in case of anomalies.
Ordinary maintenance, checks and lubrification operations must be done after the frame has been
uninstalled.
ATTENTION : Every modification or manomission which has not been previously authorized by the
constructor, will cause the dacay of every responsibility of the constructor on the product conformity.