Intempo Digital PG-01, Инструкция по эксплуатации

Страница: 8 / 12

Frequency
Audio Mode
Display modes Time and date
The broadcaster provides clock and date
information automatically so there’s no need to
mess around manually setting the clock. In the
unlikely event that the broadcaster doesn’t
transmit any clock information then the display
will show
<Time/date>.
Frequency
This shows what the frequency is of the present
station e.g. 89.30MHZ.
Advanced display modes
To enter the advanced display mode you need to
press and hold the
“Info” key for approximately
3 seconds then release it.
Software version
The first thing you will see is the software
version number.
PI (programme identification) code
If you press the “Info” key again you will now
see the PI code, this is just a code that is
associated with the transmitted station.
*Audio mode
When in FM mode the display will show if the
station being received is in mono or stereo.
* The receiver will automatically switch
between stereo and mono mode. You can
however override this function so that you
can manually switch between stereo and
mono mode, which is helpful if you’re
listening to a poor FM signal. To switch
between mono and stereo press and release
the
“Select” key, you will see on the display
“auto” or “mono”. To toggle between each
mode just press and release the
“Select” key.
Radiotext
As with DAB, the broadcaster can include
scrolling text that displays information about the
present programme. If there isn’t any Radiotext
information available then the display will show
<Radiotext>.
Programme type
This describes the “style” of music that is being
broadcast e.g. “Rock” or “Classical”.
Signal strength
The slide bar indicates how strong the signal is,
the stronger the signal the longer the bar will be.
Radiotext
Programme Type
Signal Strength
Time and Date
Every time you press the “Info” key the display
will cycle through the following display modes:-