12
! Note:
The above function is the optional update function, do not include in the standard
performance.
Note:
PCCam driver installation instructions:
1 After startup, switch to PCAM mode according to the above instructions to, and then connect to
a computer USB port.
2 When computer prompt that need install drive, select install driver from CD, select the computer
operating system (2k \ xp (w7) \ xp (w7) 64) corresponding to the driver to install;
3 Please note that you need to install two parts drivers, after installation, the computer will show as
below
4
Operation guide
4.1
Start-up interface
Press the key
calibration/power key
（
≥3S
）
to start up the machine
，
after 3-5 second
，
you could
see the interface show as Figure 1
，
after the inspection of CPU, memory, detector and image, you
will see the interface show as Figure 2.
