IntelliSense TI-002226, Руководство по установке

Страница: 3 / 6

INSTALLATION - WIRING
The scheme for wiring the call point ’ s front block to the loop is represented in (picture 4).
INSTALLATION - HOW TO FIT THE FRONT BLOCK
To install the front block to the installation base fixed to the wall proceed as illustrated in picture 5.
HOW TO REMOVE THE FRONT BLOCK
Insert the two pins at the top of the supplied reset key in the two
holes positioned at the bottom of the front block.
Push the key into the holes until the front block unlocks from the
installation base (picture 6).
CALL POINT ACTIVATION
To activate the call point press the black button positioned on the front of the device; an activation flag
appears on the top left side of the front window (picture 7).
CALL POINT RESET
1) Insert the reset key into the hole located on the bottom side of
the front block.
2) Turn the key counter - clockwise (picture 8).
L20 - VCP100 - 7200 (vA.1)
Pic. 5
Pic. 6
Pic. 7
Pic. 8
+ IN - IN
+ OUT - OUT
Pic. 4
+ IN - IN
+ OUT - OUT