4
6:0:1 PERSONAL ATTACK FROM REMOTE KEYPAD
If the installer has programmed personal attack on the keypads, pressing
and holding the
*
&
#
keys together for 3 seconds activates the system as
in 6:0. The only difference is that the tamper light will illuminate. Enter the
user code, the sounders will stop and revert to a low two tone sound.
Press the
#
key and the panel will reset.
7:0 FIRE
The installer may have linked smoke detectors to the control panel. If so
the sounder will give a loud whooping sound and the external sounder will
pulse at 2 second intervals. When the panel is set, the external sounder
constantly sounds.
Make sure that every one exits the premises.
When
you are sure that it is safe to return back, proceed directly to keypad enter
the user code. The sounders will stop and revert to a low two tone sound.
Press the
#
key the panel will reset.
USER FUNCTIONS & OPTIONS
8:0 CODE CHANGE
There maybe times that you need to change your user code. The system
has 2 user codes. To help you remember your new code, write it down
before
changing it and after you have successfully changed and
memorised the code destroy the written code. Remember, try not to use
obvious codes such as the current year. To change
user code 1
enter
your existing user 1 code then press
*
, then
9
then
1
. Four lights will
illuminate, enter your new 4 digit code. For every digit pressed of your
new code, one light will extinguish. Once your new code is entered the
panel will give you an accept tone, if the panel does not accept your code
then you may be in conflict with user code 2 or the engineering code, the
panel will abort the code change and retain your old code. Try again with
a different code. Check your new code is functioning correctly by
performing a full or night set then abort by pressing
#
.
To change
user 2 code
go through the above procedure but press
*
, then
9
then
2
.
Panel Default Code is
1
,
2
,
3
,
4
for user 1 code. User 2 code is disabled by
default.
User code access levels.
•
User 1 code can alter both user codes.
•
User 1 code can disable user 2 code. (To disable user 2 code
changed user 2 code to
0000
)
•
User 2 code has the same setting rights as the user 1 code
•
User 2 code cannot alter the user 1 code
If for any reason you loose your code or mistype in a code when changing
it, the installer will need to be contacted to default the panel codes.
PERSONAL
ATTACK FROM
REMOTE
KEYPAD
FIRE
CODE CHANGE
CODE ACCESS
LEVELS
Содержание SECURIT 800L
Страница 1: ...USER MANUAL SECURIT 800L CONTROL PANEL...
