IntelliSAW IRM-48, Руководство по установке

Страница: 25 / 28

IntelliSAW IRM-48 Reader
Installation Manual Page 25 of 28
IRM-48 Reader 910.00371.0001
8 P
RODUCT
C
ERTIFICATIONS
8.1 C
OMPLIANCE
UL / cUL 61010-1
Registered Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1
IEC61000-6-5 Level 4 substation EMC/EMI per IEC61000-4-x below
IEC 61000-4-2 ESD, ±8kV contact & ±15kV air discharge
IEC 61000-4-3 RFI, 10V/m
IEC 61000-4-4 EFT, ±4kV (power, humidity, and RS485)
IEC 61000-4-5 Surge, ±2kV line-line, ±4kV line-PE, Criteria B
IEC 61000-4-6 CRFI, 10Vrms (power, humidity, and RS485)
IEC 61000-4-8 Magnetic immunity, 100V/m, 50 & 60Hz, three axes
IEC 61000-4-9 Pulse magnetic field immunity test, 300A/m
IEC 61000-4-10 Damped oscillatory magnetic field immunity, 30A/m
IEC 61000-4-11 Voltage dips and interrupts, DC power
IEC 61000-4-12
Ring wave immunity
5kV common mode, 1kV differential (power & signal)
IEC 61000-4-16
Conducted frequency immunity
30V cont. and 300V/1s diff., common mode to earth (power)
30V cont. and 300V/1s, common mode to earth (signal)
IEC 61000-4-17 Ripple on DC supply
IEC 60255-5 Dielectric strength, 500Vrms per IEC61010-1 for 24Vdc equipment
IEC 60255-5 Impulse voltage, 806V per IEC61010-1 for 24Vdc equipment
EN 300 220
Conducted spurious and EMI spurious
(restricted frequency ranges)
EN 55011 Conducted Spurious, Class A