Intellinet 560665, Руководство пользователя

Страница: 20 / 32

18
Only packets of the VLAN Group the Port is member of will be sent.
VLAN Member
The ports need to be made member of your VLAN groups. This is for Tag
Based and Port Based VLAN Mode. The screen here looks different whether
you run Tag Based or Port Based Mode.
VLAN Member in Port Based Mode
In Port Based Mode you see a matrix of your 8 Ports. Simply select the port on
top screen you want to configure, click on Read, and then select or deselect
the ports that are on the same VLAN group. In this configuration mode you do
not need to worry about defining VLAN groups and VLAN IDs.
VLAN Member in Tag Based Mode
In Tag Based Mode you need to define and configure your VLAN groups.
Since you want the handover to other switches take place smoothly, the VLAN
IDs (Numbers) need to be like on the rest of your network. On other switches
you may have the chance to configure names. These are just for your
reference. Only the numbers are important!
There firstly add your VLAN Groups (identified throughout your network by
unique and constant numbers). Start with IDs from 100 and up. Keep in mind
that some switches use “1” as the default, while others use “4095” or “4096” as
default. Starting with 100 gives you enough free room and less compatibility
issues.
So enter “100” in the field right of VID Setting, then select or deselect which
ports are member of that group. Your up- and downlink ports need to member
of every existing group! Then click on add. The new group with its setting will