2
English
16-Port Fast Ethernet Rackmount PoE Switch • User Manual
English
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
™
16-port Fast Ethernet
Rackmount PoE Switch, Model 560405.
ConneCtions & indiCators
Leds
The LED indicators — Power,
PoE, Link/Activity — make it
easier to monitor the switch
and its connections.
NOTE:
Only Ports 9-16 can provide
power to a connected device;
all powered devices should
also comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and
uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc.
Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate
a link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord to
connect the device (next to the
On/Off switch on the rear panel)
to an AC outlet. Confirm that the
power LED on the front panel is lit.
instaLLation tiPs
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface with at least 25 mm (approx. 1”) of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328’) of network devices it’s to be connected to.
Led
status
operation
power
on
power on
Off
Check the AC connection; turn the power on
PoE
On
Port is linked to a PSE/PoE device
Off
No PSE/PoE device is linked
Link/Act
On
Valid port connection
Blinking
Valid port connection; data transmitted/received
Off
No link established
on
off
Power
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
PoE
PoE
link/act
link/act
1 3 5 7
2 4 6 8
16 RJ45 10/100M ports (1-8 shown)
Содержание 560405
Страница 11: ......
