Thank you for purchasing this INTellINeT NeTWoRK solUTIoNs™ Pro series Network
dome Camera: Vandal-Proof PAl Model 550406; Vandal-Proof NTsC Model 550420;
Vandal-Proof IR day/Night PAl Model 550413; or Vandal-Proof IR day/Night PAl NTsC
Model 550444.
This Quick Installation Guide presents the rudimentary steps required to install this device.
For camera setup, operating instructions and specifications, refer to the user manual 1) on the
CD enclosed with this product; 2) on the Web site listed below; or 3) in some cases, printed
and enclosed with this product. Contact your INTellINeT NeTWoRK solUTIoNs dealer
with comments or questions, or visit
www.networkipcamera.com
for information on the
latest software and firmware updates, related products and additional contact information.
PaCkage CoNteNtS
In addition to the Pro series Network dome Camera, the clear dome, the two-part housing (main
camera cover ring and rear plate), an external power adapter and documentation, check that
the items below are included in the package before you begin the installation:
• Power cable extender
• Round adhesive rubber plate
• “l” wrench
• 3 types of screws (two pair of extras for the dome and housing; four for ceiling attachment)
• Connector for Audio and dI/do
iNStallatioN
1. Arrange the unit on a flat working surface with the power, Ethernet and BNC cables/
connectors spread away from the housing (as shown below).
2. If you’re mounting the camera directly to a flat surface (without the use of a bracket), peel
off the protective paper covering and affix the round adhesive rubber plate to the underside
of the housing’s
rear plate. Note
the position of the
three connected
cables (leading
out and away from
the housing).
BNC
RJ-45 for Ethernet
Power
‡
3
