Intellinet 524582, Руководство пользователя

Страница: 50 / 84

50
Parameter Description
Enable Port Forwarding Select to activate the function.
Private IP This is the private IP of the server behind the NAT
firewall.
Note: You need to give your LAN PC clients
a fixed/static IP address for Port Forwarding to work
properly.
Type This is the protocol type to be forwarded. You can
choose to forward “TCP” or “UDP” packets only or
select “Both” to forward both “TCP” and “UDP”
packets.
Port Range Enter the range of ports to be forwarded to the private
IP.
Comment Enter a description of this setting, if desired.
Add Port Forwarding Fill in the "Private IP," “Type,” “Port Range” and
into the table "Comment" fields of the setting to be added and click
"Add." This Port Forwarding setting will then be added
to the Current Port Forwarding Table below. To
change or correct an entry before adding it, click
"Clear" and re-enter.
Remove Port Forwarding Select the Port Forwarding settings you want to
from the table
remove from the Current Port Forwarding table and
click "Delete Selected." To remove all Port Forwarding
settings from the table, click "Delete All." Click "Reset"
to clear your current selections.
Click “Apply” at the bottom of the screen to save the above configurations. You
can now configure other sections or start using the router.
3.6.2 Virtual Server
Use this function when you want different servers/clients in your LAN to handle
different service/Internet application types (e.g., e-mail, FTP, Web server) from
the Internet. Computers use numbers called port numbers to recognize a
particular service/Internet application type. The Virtual Server allows you to re-
direct a particular service port number (from the Internet/WAN port) to a
particular LAN private IP address and its service port number.