6
Rackmount:
1. Disconnect any cables from the switch before proceeding with rackmounting.
2. Place the device on a hard, flat surface with the front facing you.
3. Position one of the two included mounting brackets over the mounting holes on one side of the unit.
4. Insert the screws and fully tighten them with a suitable screwdriver.
5. Repeat the two previous steps for the other side of the device.
6. Insert the switch into the rack (secure with suitable screws, if desired); reconnect cables as needed.
SPECIFICATIONS
Standards & Certifications
• IEEE 802.3 (10Base-T Ethernet); IEEE 802.3u (100Base-TX Fast Ethernet); IEEE 802.3ab
(Twisted Pair Gigabit Ethernet); IEEE 802.3x (flow control, for full duplex mode)
• Certifications: FCC Class A, CE Mark, VCCI Class A, RoHS
General
• Media support: 10Base-T Cat3, 4, 5 UTP/STP RJ-45; 100Base-TX Cat5 UTP/STP RJ-45;
1000Base-T Cat5e UTP/STP RJ-45
• Packet filter/forwarding rates: 1,488,000 pps (1000 Mbps); 148,800 pps (100 Mbps);
14,880 pps (10 Mbps)
• Buffer memory: 340 kBytes for 16-port; 500 kBytes for 24-port
