full duplex mode across distances of up to 2 km over multi-mode fiber-
optic cable. The fiber port has a choice of three fiber connector types:
ST, SC or WDM.
100Base-TX Port
The 100Base-TX port supports network speed of 100 Mbps, and can
operate in half and full duplex transfer modes. The RJ-45 connector is
suitable for UTP cable Category 3, 4, 5 or better.
1000Base-LX Port
T
he 1000Base-LX port adds a fiber Gigabit Ethernet link to your network
device. Compliant with IEEE 802.3z, this port transmits data at 1,000 Mbps
in full duplex mode across distances of up to 220 m over multi-mode fiber-
optic cable. The fiber port accepts SC or WDM connectors.
1000Base-T Port
T
he 1000Base-T port supports a network speed of 1,000 Mbps and
operates in full duplex transfer mode. The RJ-45 connector is suitable for
UTP cable Category 5 or better.
(Redundant) Gigabit SFP Slot
To connect a fiber cable’s connector to a converter’s SFP slot, slide the
selected SFP module (mini-GBIC) into the SFP slot, making sure that
the module’s receptors line up with the receptors at the back of the slot.
Push until you hear a click. Once the module is inserted correctly, take
the cable connector and turn it so that it will fit into the mouth of the
module. Then push the connector into the mouth until its snaps into the
receiving grooves in the module’s mouth. Use the appropriate type of
multi-mode or single-mode fiber, depending on the SFP module being
used. The fiber optics transmit data at up to 1,000 Mbps and can maintain
data integrity over cable distances as long as 60 km, depending on the
selected SFP (mini-GBIC) module.
9
Содержание 510486
Страница 2: ......
