6
Model 505895 / 3 TB
Front Panel
The buttons and jacks on
the front panel are detailed
below from top to bottom.
Power switch
— Press on or
off; it lights blue when on.
NOTE:
It takes about a
minute for the system to
boot once the unit is on.
LED status indicators
— The OS (operating system) LED lights green
when the system is on/ready; blinks when the system is starting or is
shutting down; and remains off when the system has shut down. The
HDD (activity) LED lights amber to indicate an error (disk not found or
a RAID error); blinks to indicate data access; and remains off when
there is no disk activity.
USB backup button
— Press/hold in for 4 seconds to back up your files.
USB device port
— This USB type-A port is for connection to an external
USB hard drive, USB flash drive or USB printer.
Rear Panel
The buttons and jacks on
the rear panel are detailed
below from top to bottom,
left to right.
Security lock slot
— Lock is
not included.
Ventilation fan
— Refer to
the user manual.
Gigabit Ethernet port
— This jack features multiple LEDs. When lighted
green, the left LED indicates a link. The right LED flashes green to
indicate activity at 10 Mbps; both green and orange at 100 Mbps; and
orange at 1000 Mbps.
Restart button
— Press and release for a hardware reset of the network
drive. The device will restart after you release the button.
