operation
There are two ways to control PC switching: using the face-panel push
buttons or a hotkey sequence. (For audio/mic switching, use the hotkey
command as listed on the Quick Reference Chart.)
Face-Panel Buttons
The face-panel buttons (on top of the device) allow you direct control over
PC port switching: Simply press a button to switch to the corresponding
PC port. By default, PC port switching and audio/mic port switching are
bound together (both will be switched simultaneously). To disable the
binding, hit ScrLk +ScrLk + W on the keyboard. To re-enable the binding
of PC and audio/mic port switching, use the hotkey sequence ScrLk +
ScrLk + Q.
Keyboard Hotkeys
A keyboard hotkey sequence consists of at least three specific keystrokes:
ScrLk + ScrLk + Command key(s).
NOTE:
The two consecutive ScrLk
keystrokes and the command key or keys that follow need to be pressed
within 2 seconds of each other; otherwise, the hotkey sequence won’t
be validated.
To use a preceding sequence other than two consecutive Scroll Locks,
there are two options:
Option 1
• Hit ScrLk + ScrLk + H or press and hold down the last front-panel
button (Button 2 or Button 4) for more than 8 seconds.
• Press the key you would like to use as your preceding sequence
(SCROLL LOCK, CAPS, ESC, F12 and NUM LOCK keys are your
choices). Now you can use the new preceding sequence to execute
your hotkey commands.
Option 2
• Press the last front-panel button (Button 2 or Button 4) for more than
3 seconds.
• Press the key you would like to use as the preceding sequence.
Содержание 150101
Страница 2: ......
