Intellijel Tete, Руководство пользователя

Страница: 34 / 173

Tête + Tetrapad Manual
Main Screen & Menus in Combo Mode
In Combo Mode, Tête’s main screen offers a wealth of options and visual feedback.
Specifically:
● Pad ( ​ n
​
)
An icon is displayed for each of the four pads on Tetrapad, with the icon representing the
function to which the pad is assigned. In addition, depending on the function, the icons may
indicate other details, such as the pad’s output voltage, latched/unlatched fader and current
position, LFO waveshape/frequency, Euclidean parameters, switch states, etc. See each of
the individual Combo Mode function descriptions for more information.
● Encoder Bar
The Encoder Bar displays recording or performance characteristics, which are set using Tête’s
Screen Encoder. Rotate the Screen Encoder to scroll through the various settings. A
left-pointing arrow means there are more choices available by turning the Encoder
counter-clockwise. A right-pointing arrow means there are more features available by turning
the encoder clockwise. Since Encoder Bar functionality mostly affects recording and playback,
it is discussed in
​ The Looper ​ , later in this manual.
● Looper/Sequencer
This section displays relevant information when recording or playing back loops, as discussed
in
​ The Looper ​ . Note that, In Combo Mode, the step-recorder (Sequencer) is unavailable, and
only the real-time recorder (Looper) is used.
Additional Combo Mode functionality is accessible through the ​ CV Setup Menu ​ and ​ Combo Mode
SETUP Menu ​ as discussed later.
Page 33