Intellijel Tete, Руководство пользователя

Страница: 111 / 173

Tête + Tetrapad Manual
CV Setup Menu
Tête features three user-assignable output jacks and five user-assignable input jacks. User
assignments are made in Tête’s CV Setup Menu, which is accessed by pressing the
​ CV ​ FILE ​ ​ button
to the right of Tête’s screen encoder.
Each mode (Combo, Notes, Voltages) has its own CV Settings.
To select and assign CV (and gate/triggers) to Tête’s
input/output jacks:
1. Select the desired Mode of operation
(Combo, Notes, Voltages).
2. Short-press (<1 sec) the ​ CV ​ FILE ​ ​ button (to
the right of Tête’s Screen) to view and edit
Tête’s input and output CV settings for that
Mode.
3. Select the setting you wish to edit by rotating
Tête’s Screen Encoder.
4. Press the Screen Encoder to highlight the function currently assigned to that setting.
5. Rotate the Screen Encoder to change the assignment.
6. Press the Screen Encoder to exit editing, then repeat steps 2-4 to edit other assignments.
7. Press the ​ CV ​ FILE ​ ​ button to exit the CV Settings screen.
The following sections lists all the CV Setup options for all the various modes.
NOTE: Gates and triggers are indicated by an asterisk (*) to the right of the I/O or function name,
while continuous voltages have no such asterisk.
IMPORTANT: In Voltages Mode, all trigger (*) based bank modulations happen before the
looper/sequencer data is processed and will be overridden by playback. All continuous CV-based
modulation happens after any recorded Looper or Sequencer data plays, and is stacked/offset on top
of that playback data.
Page 110