Rubicon
2
Manual
If the Rubicon
2
PULSE TYPE
switch is set to the left (center triggered) position, then the
Tri State Pulse results from a comparison of the PULSE and TRI waves.
If the Rubicon
2
PULSE TYPE
switch is set to either the middle or right (edge triggered), then the
Tri State Pulse results from a comparison of a PULSE wave and a SAW wave.
Understanding Warp
The WARP circuit creates new waveforms by combining a Tri State Pulse with another
waveform patched into the Rubicon
2
X IN
Jack. If nothing is plugged into the
X IN
jack, then the
Page 23