µMOD II
Manual
2. X +/-
- This three position switch controls the rectification of the X input. When in the
middle position the input waveform is unaltered. When at + only the positive half of the
waveform is passed through. When at – only the negative half is passed through.
3. Y +/-
- This switch functions the same as the X +/- but for the Y channel.
4. X Attenuator
- This knob controls the attenuation of the X signal. It is unaltered when
the knob is fully clockwise.
5. Y Attenuator
- This knob functions the same as the X attenuator but for the Y channel.
Inputs & Outputs
A. X
- X signal input.
B. Y
- Y signal input.
C. RING
- Ring modulator output.
D. SUM
- This output is the result of adding the X and Y inputs, X + Y.
E. DIFF
- This output is the result of subtracting the X input from the Y input, Y – X.
F. MAX
- This output is the maximum of the X and Y signals at any given point in time. It’s
the analog equivalent of the digital OR operation.
G. MIN
- This output is the minimum of the X and Y signals at any given point in time. It’s
the analog equivalent of the digital AND operation.
Page 7
