Intellijel MIDI 1U, Руководство пользователя

Страница: 16 / 28

CONFIGURING MIDI 1U USING THE FRONT PANEL
You can configure the MIDI 1U module using either its front panel or the Intellijel Config app
(available for download from www.intellijel.com). This section discusses configuration via the front
panel. Using the
Intellijel Config app is discussed later in this manual.
Much of MIDI 1U can be configured via the LEARN and CLK
÷
buttons on its front panel, as
outlined here:
Learn a MIDI Channel
You can set the MIDI 1U’s MIDI receive channel using its LEARN button. Specifically:
1. If the LEARN [2] button is not lit, press it once to enter LEARN CC+CH mode.
In LEARN CC+CH mode , the LEARN button lights solid blue , indicating the MIDI 1U is awaiting
a MIDI message (and that it’s also capable of learning the CC jack assignment).
You can also learn a MIDI Channel if you press the LEARN button twice , which enters
LEARN MOD+CH mode . In LEARN MOD+CH mode, the LEARN button flashes blue , indicating
that MIDI 1U is awaiting a MIDI message (and that it’s also capable of learning the MOD jack
assignment).
2. Send any channel-based MIDI message into the MIDI 1U.
MIDI 1U will automatically sets itself to the sent message’s MIDI channel, and the LEARN
button will extinguish.
Additionally, MIDI 1U will automatically save all learned settings (both buttons flash green ) after
2 seconds of MIDI inactivity, ensuring it returns to exactly the same state after a power cycle.
MIDI 1U System Manual 15