©Copyright Intelligent Recording LTD 2010
Page 4 of 34
Installation
–
Handset Connection
To set up a handset connection to the Universal Adapter:
•
Remove the handset modular connector (curly cord) from your
telephone base and plug it into the “IN” port on the Universal
Adapter 3.0.
•
Plug the provided small handset line cord into the telephone base
where the handset was previously plugged in and then into the “OUT”
port on the Universal Adapter 3.0.
•
Plug the removed handset connector into one of the handset sockets
of the device (it doesn’t matter which one you use).
•
Verify that the Slide Switch Selector is set to the L1 Position (far left)
•
Set the Handset Type Switches on the back of the Universal Adapter
3.0 to the A and 1 positions.
•
Connect the supplied USB cable to the Universal Adapter 3.0 and
then insert the other end into a vacant USB port on your computer.
•
Step 2
–
Install and Configure the Recorder and Player
Software
Insert the CD that came with your Universal Adapter 3.0 into the
CD drive of your PC. The CD will run an installation application
