Chapter
3:
Web
Management
Security
‐
Switch
‐
Access
Management
3.1.5.6.
Security
‐
Switch
‐
Access
Management
Configure
access
management
table
on
this
page.
The
maximum
number
of
entries
is
16.
If
the
application's
type
match
any
one
of
the
access
management
entries,
it
will
allow
access
to
the
switch.
Mode
Indicates
the
access
management
mode
operation.
Possible
modes
are:
Enabled:
Enable
access
management
mode
operation.
Disabled:
Disable
access
management
mode
operation.
Delete
Check
to
delete
the
entry.
It
will
be
deleted
during
the
next
save.
Start
IP
address
Indicates
the
start
IP
address
for
the
access
management
entry.
End
IP
address
Indicates
the
end
IP
address
for
the
access
management
entry.
HTTP/HTTPS
Indicates
that
the
host
can
access
the
switch
from
HTTP/HTTPS
interface
if
the
host
IP
address
matches
the
IP
address
range
provided
in
the
entry.
SNMP
Indicates
that
the
host
can
access
the
switch
from
SNMP
interface
if
the
host
IP
address
matches
the
IP
address
range
provided
in
the
entry.
TELNET/SSH
Indicates
that
the
host
can
access
the
switch
from
TELNET/SSH
interface
if
the
host
IP
address
matches
the
IP
address
range
provided
in
the
entry.
Buttons
Add
New
Entry:
Click
to
add
a
new
access
management
entry.
Save:
Click
to
save
changes.
Reset:
Click
to
undo
any
changes
made
locally
and
revert
to
previously
saved
values.
