TB1006 Rev D
b.
To change the device address in the module press “U” from the Main Menu to enter the
Upload Configuration from FieldServer screen. Press “U” to start the upload (a upload
screen will show the progress of the transfer). See figure 3. Open the downloaded config.csv
with Microsoft Excel and adjust the device address area (server side node ID) as shown in
figure 4 to the address required. Save the configuration file in the same format and close the
Excel program. From the Main Menu of the ruinet program select “D” to enter the
Download Configuration to FieldServer screen. Press “D” to start the download. Turn the
power “off” to the module for a few seconds and back “on” for the settings to take effect.
Figure 2 Main Screen