Arming The Alarm System
AWAY
STAY
THEN
FIRST
To arm your system, press and hold the “AWAY” function button for 3 seconds. Your alarm
will start the exit delay timer.
In some cases, you will be prompted to enter your user code
to confirm.
To arm the system in stay mode, press and hold the “STAY” function button for 3 seconds.
Your alarm will start the exit delay timer.
In some cases you will be prompted to enter your
User code to confirm.
Once armed, do not leave the premises without disarming the system.
To arm the system in night mode (if enabled), first arm your home in stay mode. Once
complete, press the
*
key then 1
key. This will change the system from stay mode to
night mode which enables all programmed sensors to arm in away mode, and only allow
programmed sensors in certain areas to be bypassed.
Night Mode
Stay Arming
Away Arming