48
v60E - Maritime VSAT Antenna System
If you did not set the modem
connection, select the
Manual Setup
for the
Current Satellite
. Then enter the
satellite and NBD information manually
to track a satellite. Click the
Apply
button.
Click the
Next
button to go to the next
step.
(Option 2: Using Manual Setup)
ü
Step 7: Line-up Test
Perform a line-up test by the satellite operator to confirm antenna performance and operation status.
(Option 1: Using iDirect Open AMIP Modem)
1
2
3
5
1. Check modem status for connection
readiness by clicking the
Check
Modem Status
button. Then
connect to iDirect Open AMIP
modem by clicking the
CLI
Connect
button.
2. Enter the CW signal frequency
provided by your satellite operator
into the
RF Uplink Frequency,
then
click the
Apply
button to transmit
the signal.
This menu can be edited when the
antenna is connected to iDirect Open
AMIP modem and the CW is off.
3. Adjust the
Transmit Power
of the
frequency using the arrow keys
which increases or decreases by 0.5
dBm.
4. Adjust the
Antenna Angle
.
5. Enter the
Test Result
value received
from the satellite operator and click
the
Apply
button.
Click the
Next
button to go to the next
step.
