Intellian v100Ka, Инструкция по установке и эксплуатации

Страница: 55 / 123

55
OPERATING THE ACU
Antenna Settings
Manual Search
Search the desired satellite manually.
Antenna movement
Setup mode
Save
Manual search menu
Antenna menu
S E T U P M O D E ?
Y E S N O
1. Press LEFT arrow key to move cursor to YES and Press OK key to enter SETUP mode.
+ A N T E N N A + S A T E L L I T E
+ S Y S T E M
2. Press OK key to enter ANTENNA menu.
+ M A N U A L S E A R C H + D I A G N O S T I C
3. Press OK key to enter MANUAL SEARCH menu.
S T E P S I Z E A Z I M U T H E L E V A T I O N A G C
# 0 0 . 2 # 2 3 1 . 7 4 8 . 3 3 0 1 F n
4. Current IF tracking signal level (AGC)/(SIG/dB scale) is displayed to assist you in manually
peaking AZIMUTH (0°-360°) and ELEVATION (0°-90°) angle for best signal level.
To set the step size, type in the value of the desired angle of movement per key stroke on an
axis. Using the numerical key pad enter values of 0.1 to 99.9, e.g. 1.0 indicates a 1 degree
movement.
Pressing Up and Down arrow keys drive the elevation up and down, and the Left and Right
Keys drive the Azimuth clockwise or counterclockwise.Press FUNCTION key to save current
settings or abort and return to the main display.
S A V E C U R R E N T S A T I N F O ?
Y E S N O
5. If the current settings are able to locate the satellite, Press FUNCTION key to save “current
satellite information”. This will help to reduce the satellite acquisition time after restarting
the system. Press LEFT arrow key to move cursor to YES and touch the OK key to save the
settings.
NOTE:
If the gyrocompass type is not NMEA or the gyrocompass is not connected to
the ACU, the information cannot be saved.