Intelix TSPB-2V1AD, Руководство пользователя

Страница: 14 / 18

TSPB-2V1AD - Installing the TSPB-2V1AD 11
11
Figure 6: Power socket installed
4. Unscrew the power connector lock.
5. Connect the IEC power cord to the IEC socket.
6. Insert the power cord into the power connector lock and tighten
the screw (see
Figure 2
, item 12) to secure the power cable.
5.3 Inserting the TSPB-2V1AD through the Cut-Out Opening
To install the TSPB-2V1AD , do the following:
1. Carefully insert the unit into the prepared opening.
2. Take the support clamps under the table and place them into the
support clamp late slits at the desired height (on both the front
and rear sides of the unit).
3. Make sure that the upper outer rim is situated parallel to the edge
of the table.
4. Insert the mounting screws through the holes in the mounting
clamps. Tighten the mounting butterfly nuts to secure the unit to
the table surface and then lock with the mounting butterfly screw.
5.4 Connecting the Cables
1. Connect the appropriate cables from underneath.