Intelix DIGI-VGASD-R, Руководство по установке

Страница: 2 / 8

Installation
To install the Intelix DIGI-VGASD-R balun, perform the following steps:
1.
Identify the pin configuration of the baluns and RJ45 connectors on the
twisted pair cabling. To eliminate crosstalk, the pin configuration must
follow the EIA/TIA 568B standard. Please ensure that wiring is straight-
through.
2.
Power-off the connecting audio, video, and control equipment.
3.
Connect a compatible send balun to the VGA output of the video source,
the audio output of the audio source, and an IR or RS232 control source.
Do
not connect the 5V power supply.
Note the DIGI-VGASD-R does not support IR and RS232
simultaneously. If both signals are connected, IR will take precedence
over RS232.
4.
Connect the DIGI-VGASD-R receive balun to the VGA input of the video
destination, the audio input of the audio destination, and an IR or RS232
control destination. If required, connect a second video destination. Do
not
connect the 5V power supply.
5.
Complete the connection between the send and receive baluns using one
run of twisted pair cable. Ensure there are no split pairs or taps.
6.
Connect the 5V power supply to the send balun.
Compatible Intelix send baluns include:
DIGI-VGASD-WP-S
wallplate send balun
DIGI-VGASD-S modular send balun
DIGI-VGASD-T4 1 input by 4 output modular send balun
DIGI-VGASD-T8 1 input by 8 output modular send balun