ViewFlex Ca mera Assembl y Ins tructions
5
© 2019 Intelitek - Al l Rights Reserved
2.
Attach the camera to the bracket using two M3 Phillips screws. Fasten the screws.
Note: You must ensure that the camera is secure once attached.
3.
Connect the Ethernet cable (green) and the breakout cable (black) to the camera. Secure the
cables to the vertical beam with two cable clamps. The clamps should be secured with M5 flat
head Allen screws and T-slot nuts.
4.
Secure the loose sections of the cables to the table using cable clamps and nylon cable ties. The
clamps should be secured to a slotted table with M5 flat head Allen screws and T-slot nuts, and
to a Formica table with pan head Phillips screws.
