9 NC Programming Routines
9.6 Canned Cycle Programming
138
Example Motion
The straight drill cycle will result in motion as shown below.
The peck drill cycle will result in motion as shown below.
9.6.3.
G82: Straight Drilling with Dwell
A G82 code works just like a G81 code (see
9.6.2 G81 & G83: Straight and Peck Drilling, pg. 136), except
that it allows for a dwell (P code) at the bottom of the hole (point Z).
The use of the G82 code is shown in following example.
NC Code Example:
