INTELCO ELECTRONICS
5
ISO9001/2008
Rev. 1.00 January 2015
Keylock device is real-time monitoring its keypad and is ready to act individual for every
onboard relay, according pressed combination of keys and according the programming
codes. (see
“Programming
” section)
Every Key (1-8) on the keypad is refer to one relay at the bottom side of the device
according the onboard printed number.
Each onboard relay has 2 working mode:
Act as
Unprotected Relay :
At factory reset every Relay(1-8) act like
Unprotected Relay
, so by pressing one
Key(1-8) then the corresponding relay will be armed. Leaving the pressed key(1-8)
will release the relay too.
Act as
Password Protected
Relay:
After programming and enable one of Relay(1-8) working as
Password Protected
Relay
then any action referred to this Key it will requires 3-digit code in order to
take effect, in any other case action will be rejected.
Working a Relay as
Password Protected Relay
means that, number of relay
followed by 3-digit code is requested to by pressed, in order to arm this Relay.
At this working mode each relay has some extra features:
Latch Mode Off (Timer Mode)
Latch Mode On
Activating a
Password Protected Relay
with “653” password
set,
requires the above
combination of Key to be pressed.
Operation:
CAUTION :
Absolute maximum current for every relay are: 3A - 120VAC / 3A - 24VDC / 1A - 125V~.
2 653
Relay
Current User password
of Relay
