22
Features
Audio volume:
use the “volume” key to setup
Speaker audio reception.
HOLD:
during a call, press the “hold” key once, to
put the call on hold (with music). To resume nor-
mal conversation, press this key again.
REDIAL:
pressing this key will recall de last dialed
number.
(Speaker):
loud speaking
Voice-mail key:
enables to access voice-mail and
message/phone call signaling.
FLASH/SET:
used for transfering phone calls and
for special settings.
Keys programming
Quick dialing
To program this key, keep the phone on hook and
follow this procedure:
type the number you want to record (e.g.: 200);
next, keep pressed for 5 seconds the key you
want to program;
after this procedure, to dial, you just will have to
pick up the phone and press one of the
programmed keys.
Voice-mail key (Red Bar)
Follow the same procedure above, to program this
key.
Note:
This key also signalizes a call incoming or
the presence of a message in the voice-mail
(depending on the PABX signaling type).
