Intelbras iIVA 5040 AT, Руководство пользователя

Страница: 12 / 15

12
8. After making the configuration, tighten the screws for fixing the sensor position on both the receiver and the transmitter, as shown in
the following figure:
Parafuso de fixação
ajuste horizontal
Parafuso de travamento
Parafuso de fixação
ajuste vertical
Horizontal adjustment attaching
screw
Vertical adjustment attaching
screw
Locking screw
9. To close the sensor follow the steps below:
1. Place the sealing rubber in the passage of the wires in the TX and RX. (Fig.1)
2. Place the front cover, attach the upper lock first and then the lower lock. (Fig.2)
3. Place the screw on the front cover. (Fig.3)
Parafuso tampa frontal
Borracha de
vedação
Trava
Superior
Travas
Laterais
Travas
Inferiores
Tampa
Frontal
Gabinete
1 2
3
Sealing
Rubber
Fig. 1
Front cover
Cabinet
Top lock
Bottom
locks
Front cover screw
Side locks
Fig. 2
Fig. 3