Intel Xeon E5-2400 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 100

Intel Xeon E5-2400 Скачать руководство пользователя страница 27

Intel® Xeon® Processor E5-2400 Product Family

27

Thermal/Mechanical Design Guide

Independent Loading Mechanism (ILM) and Back Plate

As indicated in

, socket protrusion and ILM key features prevent 180-degree

rotation of ILM assembly with respect to the socket. The result is a specific Pin 1
orientation with respect to the ILM lever.

3.3

ILM Cover

As indicated in

, ILM covers are available as discrete components and pre-

assembled to the ILM load plate.

The ILM cover will interfere with a processor and pop off if the ILM is closed with a
processor in the socket.

The ILM cover is designed to be interchangeable between different suppliers validated
by Intel. Performance of the pop off feature may decline if the ILM cover supplier is
different than the ILM supplier. The ILM cover can be removed manually if the pop off
feature is not desirable, or not functional.

The ILM cover has UL94 V-0 flammability rating.

The ILM cover durability requirement is 20 cycles (1 cycle = install and remove).

§

Figure 3-4. Pin1 and ILM Lever

«
...
25
26
27
28
29
...
»

Содержание Xeon E5-2400





































































































Отзывы:

Нет отзывов