Intel Vectra VEi7, Руководство по установке, Страница: 5 / 34

1 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter
Microsoft Windows 95 SR2.5
1 Installing the Intel EtherExpress PRO 100B-TX PCI
Ethernet Adapter
Microsoft Windows 95
SR2.5
Connecting to a
Windows NT 3.51 Server Requirements
• HP Vectra with Windows 95 SR2.5.
• Intel EtherExpress PRO 100B-TX PCI Ethernet adapter and driver disk
version 2.51.
• Driver File: E100B.SYS, version 2.24
• Microsoft Windows 95 SR2.5 media.
• Microsoft Windows NT 3.51 Server system that supports NetBEUI,
NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network
protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100 PCI
adapter card into a PCI slot.
2 Connect network cable media to the Intel EtherExpress PRO 100 card.
3 Power on the machine and start the system in MS-DOS mode.
4 Insert the EtherExpress PRO 100 driver disk, “PRO/100B LAN Adapter
Configuration and Driver Diskette” and execute “SETUP.EXE”.
5 Select “View Adapter Configuration” and verify the resource settings
listed above under the heading “View Adapter Configuration”.
6 Save any required changes and exit.
7 Remove the Intel driver diskette from the floppy drive and restart the
system.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 10 03 10
I/O Address 1020 DCE0 E400