Intel UltraBookIIi, Руководство пользователя

Страница: 55 / 158

UltraBookIIi User Guide 3–27
Using
If you have only one memory module installed,
use this procedure to remove it.
If you are installing or upgrading only one
main memory module, install it in the
position of the memory module shown in
Figure 3-14 (the memory slot closest to the
rear of the unit).
a. Using a small flat-tip screw driver, pry gently
upward against the outer edges of the
system’s memory module until the memory
module is free of its RAM connector, as shown
in Figure 3-14.
Caution: Pry gently upward at the
leverage points shown in Figure 3-14 or you
may damage your memory modules or the
main system board and void your system
Figure 3-14 Removing the Main Memory Module