background image

ii

 

Important Safety Instructions

 

Read all caution and safety statements in this document before performing any of the instructions.  
See 

Intel

®

 Server Boards and Server Chassis Safety Information

 on the Resource CD and/or at 

http:\\support.intel.com

 

Wichtige Sicherheitshinweise 

Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor Sie eine 
der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel-
Serverplatinen und -Servergehäusen auf der Ressourcen-CD oder unter 

http:\\support.intel.com

 

Consignes de sécurité 

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document 
avant de suivre toute instruction. Consultez 

Intel Server Boards and Server Chassis Safety 

Information

 sur le CD Resource CD ou bien rendez-vous sur le site 

http:\\support.intel.com

 

Instrucciones de seguridad importantes 

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar 
cualquiera de las instrucciones.  Vea 

Intel Server Boards and Server Chassis Safety Information

 en 

el CD Resource y/o en 

http:\\support.intel.com

 

重要安全指导

 

在执行任何指令之前,请阅读本文档中的所有注意事项及安全声明。参见 Resource 
CD(资源光盘) 和/或 

http:\\support.intel.com

 上的 

Intel Server Boards and 

Server Chassis Safety Information

(《Intel 服务器主板与服务器机箱安全信息》)。 

 

Copyright © 2000 - 2003 Intel Corporation.  All rights reserved.  No part of this document may be copied, or reproduced in 
any form, or by any means without prior written consent of Intel. 

Intel Corporation (Intel) makes no warranty of any kind with regard to this material, including, but not limited to, the implied 
warranties of merchantability and fitness for a particular purpose.  Intel assumes no responsibility for any errors that may 
appear in this document.  Intel makes no commitment to update nor to keep current the information contained in this 
document. 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the 
FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 
to correct the interference at his/her own expense. 

Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. 

* Other names and brands may be claimed as the property of others. 

Содержание SR870BH2 - Server Platform - 0 MB RAM

















Отзывы: