Intel SR2600UR - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 136 / 234

116 Intel
®
Server System SR2600UR/SR2625UR Service Guide
Figure 108. Removing the RAID Battery Backup Unit
6. Install the large air baffle. For instructions, see “Installing the Large Air Baffle” on
page 70 .
7. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” on page 57 .
8. Install the PCI riser assembly. For instructions, see “Installing the PCI Riser
Assembly” on page 51 .
Installing and Removing the Server Board
Removing the Server Board
To remove the server board, follow these steps:
1. If installed, remove the PCI riser assembly. For instructions, see “Removing the
PCI Riser Assembly” on page 50 .
2. If installed, remove the processor air duct. For instructions, see “Removing the
Processor Air Duct” on page 56 .
3. Remove the bridge board. For instructions, see step 5 in “Removing the Midplane
Board” on page 102 .
4. Remove the large air baffle. For instructions, see “Removing the Large Air Baffle”
on page 70 .
5. Remove the fan module assembly. For instructions, see “Replacing a Fan Module”
on page 127 .
6. Remove the I/O expansion module, if installed. For instructions, see “Removing
the I/O Expansion Module” on page 97 .
A
B
Midplane RAID
BBU Connector
Chassis
Tab(2)
Power
Supply
Batter
y
Backup
Unit
AF002979