Intel® Server System SR1630BC
Power Sub-System
Revision
1.3
Intel order number E44588-003
20
3.2.5
P6 – Slim-line SATA Optical Disk Drive Power Connector
Connector housing: 6-pin SATA Power
Contact: 15u plating minimum
Table 11. P6 – Slim-line SATA Optical Disk Drive Power Connector Pin-out
Pin
Signal
22 AWG Color
1 Reserved
N.C.
2 +5
VDC
Red
3 +5
VDC
Red
4 Reserved
N.C.
5 COM
Black
6 COM
Black
3.3
Efficiency
The following table provides the required minimum efficiency level at various loading conditions.
These are provided at three different load levels: 100%, 50%, and 20%. Output should be
loaded according to the proportional loading method defined by 80 Plus. Efficiency should be
tested per 80 plus requirement.
Table 12. Power Supply Efficiency
Loading
100% of Maximum
50% of Maximum
20% of Maximum
Minimum Efficiency
82%
85%
82%
3.4
AC Input Voltage Requirement
The power supply must operate within all specified limits over the following input voltage range,
shown in the following table. Harmonic distortion of up to 10% THD must not cause the power
supply to go out of specified limits. The power supply shall power off if the AC input is less than
75 VAC +/- 5 VAC range. The power supply should start up if the AC input is greater than 85
VAC +/- 4 VAC. Application of an input voltage below 85 VAC shall not cause damage to the
power supply, including a fuse blow.
Table 13. AC Input Rating
Parameter
Minimum
Rated
Maximum
Start up VAC
Power Off VAC
Voltage (110)
90 V
rms
100-127
V
rms
140
V
rms
85Vac +/-4Vac
75Vac +/-5Vac
Voltage (220)
180 V
rms
200-240
V
rms
264
V
rms
Frequency
47 Hz
63 Hz
