15
Chapter 3
1. Apply power to the SOM-4486 application with a color TFT dis-
play attached. This is the default setting for the SOM-4486 series.
Make sure that the AWDFLASH.EXE and *.BIN files are located
in the working drive.
Note:
Make sure that you do not run AWDFLASH.EXE
while your system is operating in EMM386 mode.
2.
At the prompt, type AWDFLASH.EXE and press <Enter>. The
VGA configuration program will then display the following:
Figure 3.1: BIOS VGA setup screen
3. At the prompt, type in the BIN file which supports your display.
When you are sure that you have entered the file name correctly
press <Enter>. The screen will ask “Do you want to save?” If you
wish to continue press Y. If you change your mind or have made a
mistake press N.
4. If you decide to continue, the screen will issue a prompt which will
then ask “Are you sure to program (Y/N)?” If you wish to con-
tinue, press Y. Press N to exit the program.
Содержание SOM-4486 ETX Module
