manualshive.com logo in svg

Intel SE7501CW2, Руководство по эксплуатации продукта

Поделиться
Скачать
Intel SE7501CW2 Скачать руководство пользователя страница 12

12 

 

Intel Server Board SE7501CW2 Product Guide 

Super I/O 

The Server Board SE7501CW2 uses the Winbond W83627HF Super I/O Plug and Play Compatible 
with ACPI-Compliant Controller/Extender.  This device provides the system with the following: 

• 

Two serial ports 

• 

One parallel port 

• 

Floppy disk controller 

• 

PS/2-compatible keyboard and mouse controller 

• 

Two ATA 100 IDE channels 

• 

Hardware monitor controller 

The Server Board SE7501CW2 provides the connector interface for the floppy disk drive, dual 
serial ports, parallel port, PS/2 mouse, and PS/2 keyboard. 

Serial Ports 

The Server Board SE7501CW2 provides one DB9 connector on the back panel for serial port A.  
Serial port A is compatible with 16550A and 16450 modes.  The port can be set to one of four 
different COM ports, and each can be enabled separately.  When enabled, each port can be 
programmed to generate edge- or level-sensitive interrupts.  When disabled, serial port interrupts 
are available to add-in cards.   

A DH10 10-pin serial header is available on the baseboard for an optional serial port B. 

Parallel Port 

The Server Board SE7501CW2 provides a 25-pin parallel port back panel connector.  The Super 
I/O provides an IEEE 1284–compliant 25-pin bidirectional parallel port.  BIOS programming of the 
Super I/O registers enables the parallel port and determines the port address and interrupt.  When 
disabled, the interrupt is available to add-in cards. 

Floppy Disk Connector 

The floppy disk connector on the server board provides the interface to the floppy disk drive from 
the floppy disk controller. 

Keyboard and Mouse Connectors 

The separate keyboard and mouse connectors, found on the back panel of the server board, are 
PS/2-compatible.  The keyboard and mouse connectors are interchangeable. 

Содержание SE7501CW2






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды