Intel SC5650HCBRP, Руководство по обслуживанию, Страница: 16 / 20

Server System Features
2 Intel
®
Server System SC5650HCBRP Service Guide
Feature Description
ƒ
One 92-mm system fans (Hard Disk Cage fan)
ƒ
Active processor heat sink(s) is required
Processors
ƒ
Up to two Intel
®
Xeon
®
Processors 5500 series with Thermal Design Power
(TDP) up to 95 W.
ƒ
Up to two Intel
®
Xeon
®
Processors 5600 series with Thermal Design Power
(TDP) up to 130 W.
Memory
ƒ
Six memory channels (three channels per processor socket) with support for
800/1066/1333 MT/s ECC Registered (RDIMM) or ECC Unbuffered (UDIMM)
DDR3 memory.
o
12 DIMM slots, two DIMM slots per channel
ƒ
No support for mixing of RDIMMs and UDIMMs.
ƒ
Mixing memory type, size, speed, and/or rank on this platform has not been
validated and is not supported
ƒ
Mixing memory vendors is not supported on this platform by Intel
ƒ
Non-ECC memory is not supported and has not been validated in a server
environment
Chipset
ƒ
Intel
®
S5520 Chipset and Intel
®
82801Jx I/O Controller Hub (ICH10R)
Add-in Card Slots
ƒ
Six expansion slots
o
One PCI Express* Gen 2 slot (x16 Mechanically, x8 Electrically)
o
Three PCI Express* Gen 2 x8 slots
o
One PCI Express* Gen 1 slot (x8 Mechanically, x4 Electrically)
shared with SAS Module slot. This PCI Express* Gen 1 slot is not
available when the SAS module slot is in use and vice versa
o
One 32-bit/33 MHz PCI slot, keying for 5 V and Universal PCI add-
in card
RAID support
ƒ
Optional Intel
®
SAS Entry RAID Module AXX4SASMOD provides Intel
®
Embedded Server RAID Technology II with SAS RAID 0, 1, 10, and optional
RAID 5 support provided by the Intel
®
RAID Activation Key AXXRAKSW5, or
IT/IR RAID with entry hardware RAID 0, 1, 10/1E, and native SAS pass
through mode
ƒ
Optional Intel
®
Integrated RAID Module SROMBSASMR
(AXXROMBSASMR), provides RAID 0, 1, 5, 6 and striping capability for
spans 10, 50, and 60
Video Support
ƒ
Server Engine* LLC Pilot II* with 64 MB DDR2 memory, 8 MB allocated to
graphics
ƒ
Dual video is supported
USB Drive Support
ƒ
One internal USB port
ƒ
One internal low-profile USB port for Solid State Drive
I/O control support
ƒ
External connections:
o
DB9 serial port A and Serial port B connection
o
One DH 10 serial port connector (optional)
o
Two RJ-45 NIC connectors for 10/100/1000 Mb connections: Dual
GbE through the Intel
®
82575EB Network Connection with Intel
®
I/O Acceleration Technology 2 support
o
Four USB 2.0 ports at the back of the system
o
Two USB 2.0 ports at the front of the system chassis
ƒ
Internal connections:
o
One 9-pin USB header supports two USB 2.0 ports
o
One internal USB port that supports a peripheral, such as a floppy
drive
o
Six SATA connectors at 1.5 Gbps and 3 Gbps