Intel SBCEFCSW, Руководство по установке

Страница: 31 / 62

17
3 Information panel LEDs and external Fibre
Channel ports
This chapter describes the information panel and LEDs on the switch module. This chapter also identifies the
external Fibre Channel ports on the information panel.
Information panel
The switch module information panel contains LEDs and two Fibre Channel ports, as shown in Figure 6.
Figure 6. Fibre Channel switch module information panel
The switch module information panel contains:
• Comprehensive LEDs that display the status of the switch module and the network. For more information,
see “LEDs” on page 17.
• Two external Fibre Channel ports to connect Fibre Channel devices, end devices, and servers. These ports
are identified as port 2 and port 1 in the switch configuration menus and are labeled 2 and 1 (from top to
bottom) on the switch module, as shown in Figure 6.
LEDs
There are three sets of LEDs on the information panel. The first row of LEDs at the top of the switch module
represent switch module status and include OK,
♥
(heartbeat), and ! (Fibre Channel switch fault). The second
and third sets of LEDs represent status for external Fibre Channel port 2 and external Fibre Channel port 1.
The port LEDs include port logged-in, port activity, and port fault. Figure 7 on page 18 shows the locations of
these LEDs on the switch module. In addition, this section provides a description of each LED and their and
diagnostic flash patterns. See the Intel
®
Blade Server Switch Module SBCEFCSW: Management and User’s
Guide for more information about diagnostic flash patterns.