manualshive.com logo in svg

Intel S815EBM1 - Server Board Motherboard, Руководство по эксплуатации продукта

Поделиться
Скачать
Intel S815EBM1 - Server Board Motherboard Скачать руководство пользователя страница 16

 

16 

 

Intel Server Board S815EBM1 Product Guide 

RJ-45 LAN Connector LEDs 

Two LEDs are built into the RJ-45 LAN connector.  Table 4 describes the LED states when the 
board is powered up and the LAN subsystem is operating. 

Table 4. 

RJ-45 LAN Connector LEDs 

LED Color 

LED State 

Indicates 

Off 

10 Mbit/sec speed is selected. 

Green  

On 

100 Mbit/sec speed is selected. 

Off 

LAN link is not established. 

On (steady state) 

LAN link is established. 

Yellow  

On (brighter and pulsing) 

The server is communicating with another server on the 
LAN. 

Battery 

A battery on the server board keeps the values in CMOS RAM and the clock current when the 
server is turned off.  See Chapter 2 for instructions on how to replace the battery.  

Power Management Features 

Power management is implemented at several levels, including: 

• 

Software support: 

 

Advanced Power Management (APM) 

 

Advanced Configuration and Power Interface (ACPI) 

• 

Hardware support: 

 

Wake on LAN technology 

 

S5 wake on all PCI slots 

 

Wake on Ring 

 

Resume on Ring 

If the board is used with an ACPI-aware operating system, the BIOS can provide ACPI support.  
Otherwise, it defaults to APM support.  

Wake on LAN Technology 

The Wake on LAN technology connector can be used with PCI bus network adapters that have a 
remote wake-up connector.  Network adapters that are PCI 2.2 compliant assert the wake-up signal 
using the PCI bus signal PME# (pin A19 on the PCI bus connectors).  See Figure 21 on page 68 for 
the location of the Wake on LAN technology connector on the server board. 

 CAUTION 

For Wake on LAN technology, the 5 V standby line for the power supply must be capable of 
providing ad5 V standby current.  Failure to provide adequate standby current when 
implementing Wake on LAN technology can damage the power supply. 

Содержание S815EBM1 - Server Board Motherboard













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды