Intel S1200RP, Начало работы

Страница: 15 / 17

Firmware Upgrade Process
Getting Started Guide 11
17. Use the DediProg software utility to create a backup copy of the SPI device.
18. Program one of the development kit firmware images to the SPI device
(
SDV_RP_B6_release.rom
,
SDV_RP_B6_debug.rom
or
SDV_RP_B6_srcdbg.rom
)
using the ‘Batch’ feature in the DediProg Engineering utility.
19. Remove the DediProg S08 test clip from the motherboard.
20. Turn off the power supply and wait ten seconds.
21. Power up the target PC and boot to the UEFI shell.
The system performs one configuration cycle on the first boot. Wait for this Note:
cycle to complete before entering the UEFI Shell.
22. After the platform resets, verify that the firmware functions correctly by entering
setup and booting to the UEFI shell.
The Intel® Server Board S1200RP UEFI Development Kit is ready for use in UEFI
development after verification of a firmware update.
Detailed steps for this procedure are explained in the Intel® Server Board S1200RP
UEFI Development Kit Firmware Installation Guide.